boat  
I'm looking for a Micro Poke Boat, Old Town Otter kayak, or similar lightweight solo boat for paddling quiet waters and taking photos. Zoom photography requires a very stable boat, and my back wo...
let me you have but looking a trailer to hual 14' fishing boat light duty will do
WANTED: Does anyone out there have a Poke boat they would like to sell? I would prefer a Maxi Poke, but would consider any.
Live in Kansas and want to use it on the rivers.
Thanks!
Laura
...lation to my legs... and making them fall asleep.
would anyone have any Idea how I could Girl proof my boat a bit, or do you know anyone who has worked it out and can talk me through it?
Thanks...
What boat would be a good fit for a 6'4" and quite thin guy? (I am new at this and could use your advice as far as a starting point to look from). Thanks.
I have had the same problem with my 14 ft boat. I'm 5ft 2. I've got a good solution; Malone Racks. All I have to do is get the boat up to the side of my car, heft it into the racks two �...
... found this the way I did.
I used to sell kayaks. I sold the Walden brand. The vista was a very nice boat. A little tippy for a beginner, but you could easily work your way past that once you paddl...
The Jefe Grande would be a great boat for you especially if you are interested in getting into whitewater paddling fairly seriously.
We also make a boat called the Remix XP that is a cross between ...
You shouldn't have the skeg on the boat for whitewater, you need to be able to turn the boat quickly and the skeg does a good job of preventing that!
Keep the RR5 for flat, unless you get ser...
I have a friend with a Modulus system boat from Edyline. Nice enough boat . It gets a great deal of use and he is an exceptional paddler . The boat sees more sea time that most ever will . The boat is...
I have an almost new POKE boat that I'm selling for a friend who move to DC. It was used once or twice and is a micro poke boat. 17 lbs sold new for $850. Where are you located? Can you reply ...
...roblems wet exiting, But just right and your good. Sometimes its a matter of padding out a little loose boat to fit, Other time you can get lucky and find that just right boat. Best place to start is ...
...
I agree we are probably talking about 50 maybe 80lbs of de-boned meat.
Nevertheless, an overload boat is an overloaded boat. It makes no difference whether it is a kayak, canoe, run about, or a...
...uper-Mend. It is a 2 part system like epoxy and it has worked great as a repair on my 14' aluminum boat for several years now and this boat gets some hard use. It is not too aesthetically pleasin...
...rip and profile the strips? You bet it is. Especially since you will now have the tools for your second boat.( There is always a second boat) If you don't want the tools you can always sell them....
I have a Necky Gliss for sale. I just bought a new boat so I need to let this one go. It's a hot little boat that's great for river running but can play in a hole just as well.
Let me kn...
... for 55, but I did have a herniated disk 10 years ago and don't want to go there again- so a light boat will be nice. The roof rack will have rollers on the back to facilitate loading by myself. ...
...couple questions for anyone who knows or who has built this kayak: Was it easy to build? Is this a fast boat with some good secondary stability? Does it have a rear hatch? - from the layout it doesn&#...
...vies and read books but they do not seem to help any. I am now beginning to wonder if I am in the wrong boat. I am riding a Wave Sport Big EZ. I am 6-1 and weigh 150 lbs. This is the lower limit for t...
...hwart will make it more difficult to load packs into the canoe if you are using it as a tandem tripping boat but I think you can get a kneeling thwart that is designed to be removable when you don...
As a new Kayaker I would recomend a 12ft or longer Rec type boat to start. As you learn you will likely wish to move on to a longer a slimer kayak. The place you wish to paddle are open water so I als...
I have used both the Swift whitewater and flatwater asymmetrical boats in a wide variety of paddling conditions. The main reason to have an asymmetrical hull is so that the bow of the boat Turns easil...
Is The boat a wood boat? If so you will want to make sure it is dry in that area !!Very Dry!!! Then sand and use a small amount of clear epoxy. As for the finish a good sanding and a good coat of mari...
...iving a few kayaks and have not settled on anything yet. This is a first kayak, so it will be a plastic boat this time. I live in Halifax, Nova Scotia so despite good kayaking, there is not a lot of v...
The Liquidlogic Remix XP is a perfect cross over boat.
It is made to do both.
Here is the link to the Liquidlogic page about the XP.
http://liquidlogickayaks.com/remix_xp10.cfm
Google it as ...
...a Paddle Show in March about these requirements. Apparently an awful lot of drownings happen close to a boat (a drunk falls overboard without a PFD on etc.), so it was thought a heaving line would pre...
...ED.when kayaking for fun,I have gotten as high as 17miles,this is a 8-10hr day.the wind tide's and boat traffic ,moon tide's,all have value's as you paddle,it's not just your weigh...
The Content on this site is provided for general information purposes only. Your use of the Content, or any part thereof, is made solely at Your own risk and responsibility. By entering this site you declare you read and agreed to its Terms, Rules & Privacy.
Copyright © 2006 - 2010 My Kayaking Buddies |
TIP: Write your question in details [ why? ]
Latest Posts
|
more posts...